Space Walk is the culmination of the Adrift in Space chapter in Escape Simulator, presenting players with an immersive spacewalk experience fraught with complex puzzles. As a veteran escape room enthusiast and avid player of Escape Simulator, I‘m delighted to provide a comprehensive, step-by-step walkthrough to help you conquer this final challenge.
Overview of Space Walk
Before jumping into the solutions, let‘s quickly overview the setup for this escape room. You start outside the space station, tethered by a lifeline. Your objective is to get back inside by solving a series of cryptic puzzles and manipulations.
Space Walk truly shines in its immersive environment and intricate attention to detail. As you look around, you‘ll see the vastness of space surrounding you, with the earth glowing in the distance. The space station exterior and components like airlocks and hatches are modeled with precision. All of this combines to make you feel like you‘re really on a spacewalk!
Now let‘s get oriented to the puzzles you need to solve. There are 10 key steps to escaping this room:
- Decode the first keypad
- Unlock the E2 door wiring
- Unlock the E1 door wiring
- Balance the fuel tanks
- Get the red battery status
- Insert the laser source
- Decode the second keypad
- Unlock the first hatch
- Unlock the second hatch
- Connect the pipes
I‘ll provide detailed solutions for each step in the walkthrough below. With the right solutions handy, you‘ll be back inside the space station in no time! The feeling of removal your helmet and returning to safety is so satisfying after besting this challenging finale.
Step-by-Step Walkthrough
Here are the complete solutions for escaping Space Walk:
1. First Keypad
The first keypad has a clue next to it saying "passwords are in ascending order." Look closely at the smudged numbers on the keypad itself – they are 2, 3, 5, and 7. Simply enter them in ascending sequence (2357) to open the compartment and collect the Laser Source item inside.
2. E2 Door
Flip the switch next to the E2 door to open the wiring panel. You need to connect the colored wires from left to right in this specific order:
- Blue
- Red
- Yellow
- Green
Connecting this wire sequence will unlock the E2 door.
3. E1 Door
Use the same wiring sequence to unlock the E1 door. Again connect the colored wires in this left-right order:
- Blue
- Red
- Yellow
- Green
4. Fuel Tank
Balancing the fuel tanks is one of the more challenging steps. First, check the sensor readings for each fuel type on the Door Control Unit. According to the pie charts shown:
- Ox = 33.4%
- Ix = 50%
- N = 16.6%
The total fuel weight is listed as 12 tons. Calculate the fuel amounts as follows:
- Ox = 12 tons x 33.4% = 4 tons
- Ix = 12 tons x 50% = 6 tons
- N = 12 tons x 16.6% = 2 tons
With the amounts calculated, enter them into the Fuel Tank Monitor interface:
- O: 4 tons
- Ix: 6 tons
- N: 2 tons
Verify the values to balance the tanks. Proper fuel distribution is essential!
5. Red Battery
Use the Crane Control Unit to remove the red battery from the engine area. When you drop the battery to the ground, a red status item will appear. Be sure to collect this important item!
6. Laser Source
Examine the red status item in your inventory to open its cover. Place the Laser Source (collected from the first keypad compartment) into the laser source holder inside. Finally, put the status back into the red battery and return it to the engine using the crane.
7. Second Keypad
Opening the second keypad‘s compartment yields a crucial tablet. Look on the back of the tablet for the password clue. Input the code (1531) to collect the pipes for the next step.
8. First Hatch
On the main Door Control Unit, you‘ll see Hatch #3 is locked. Enter code C06 here to unlock the first hatch.
9. Second Hatch
Similarly, Hatch #1 is also locked initially. Input code B04 on the Door Control Unit to unlock the second hatch.
10. Connect the Pipes
For the last step, use the pipes collected from the second keypad to connect E1 and E2 to the working Fuel Tank Monitor. Make sure not to connect them to the broken monitor. Refer to the screenshot for the proper pipe layout.
Once connected, flip the final switch on the Door Control Unit to complete Space Walk!
Additional Tips and Advice
Here are some extra tips to help you conquer Space Walk:
- Take your time to experiment and enjoy the space setting – no need to rush!
- If a puzzle has you stumped, take a break and come back to it fresh.
- The clue for each step is always nearby – keep an eye out for notes, markings, and other hints.
- Pay close attention to small details in the environment for hidden clues.
- Don‘t forget to look on the backs of items and inside compartments.
Conclusion
I hope this detailed walkthrough gives you the tools and knowledge to escape Space Walk! Let me know if you have any other questions. Adrift in Space culminates in an immensely satisfying way with this final spacewalk challenge. Applying the solutions provided here will allow you to fully experience the completion of this chapter. Space Walk is a prime example of the intricate gameplay and cryptic hints that make Escape Simulator such an engaging series. I highly recommend trying more of the game‘s escape rooms once you‘ve mastered this one!
